SAU-XDS510-USB Lite

SAU-XDS510-USB Lite

Software / Documentation

SAU-XDS510-USB Lite emulator set contains:

  • SAU-XDS510-USB Lite JTAG emulator.
  • 3 adapters (14-pin TI, 20-pin CTI and 20-pin ARM).
  • CD-ROM with drivers.

Key feautures:

  • Supports Texas Instruments digital signal processors, processors and microcontrollers (C2000 (including LF24xx and F24x), C5000, C6000, ARM7, ARM9, ARM11, Cortex-A, Cortex-R, Cortex-M, DaVinci, OMAP, Sitara, Tegra, Integra, Keystone, Piccolo, Delfino, Hercules, Stellaris, Tiva, TMS470, TMS570, RM4, etc.), TMS320VC33. It also supports any multicores and/or multiprocessors combinations of listed above cores and processors both placed into one chip and connected in one JTAG chain in device with possibility of connection other devices ( e.g. FPGA ) in this chain.
  • Ultra-miniature design ( smallest XDS510 class emulator of currently produced ): emulation controller with buffers is placed inside of connector body. It allowed to eliminate JTAG tail which significantly improved JTAG signal quality and connection stability in EMI conditions.
  • Acceleration is up to 1.3 times versus Iso Plus emulator ( emulation controller similar to the one used in Iso Plus V.2).
  • Works with higher clock frequencies TCK without "fine tuning" ( up to 52.5MHz depending on debugging device).
  • Supports from +1.65 volt up to +3.3 volt JTAG interfaces ( 5V tolerant ).
  • Controlled JTAG signal level for work with interfaces with high PD signal level.
  • Tight JTAG signal level setting independent from PD level.
  • Compatible with Texas Instruments XDS510 emulator.
  • Advanced JTAG controller (SAU V.2) enables high emulation performance.
  • Compatible with USB 1.1 and USB 2.0 (high speed, full speed).
  • Drastic boost performance when conected via USB 3.0 ( depending on host controller type and his driver ).
  • While connected to PC via USB no additional power source is required.
  • Three color status and mode LED indicator.
  • Supports programming and configuring FPGA and CPLD through SVF player (SVF Specification Rev. E + Lattice Semiconductor enhancements).
  • Supports internal and external in-circuit supported processors memory programming through SauFlash/TCLXDS utility shipped with drivers.
  • Supports Adaptive Clocking without additional adapters.
  • Flexible TCK frequency adjustment.
  • Possible to work from target TCK source ( from TCKR (TCK_RET)).
  • Possible to work without TCKR (TCK_RET) signal.
  • Supports JTAG signal buffering including registers clocking TCK buffering.
  • Compatible with Texas Instruments Code Composer IDE (v 4.10 for TMS320C3x/4x) and Code Composer Studio IDE ( all versions ).
  • Compatible with Microsoft Windows 2000, Windows XP, Windows Vista (32-bit, 64-bit), Windows 7, Windows 8, Windows 8.1, Windows Server.
  • Compatible with Linux ( full technical support for RHEL, Centos, Fedora distributions, consultative for others ).
Price: 499 $

← Back to Section




яндекс.ћетрика